How long does a garage floor take?
Most one- to three-car garages are ground, repaired, coated and flaked in one or two days. Put shelves and toys back after 48 hours and park on it after three days; longer is better. We give you the exact schedule before we start.
Will it peel like the last floor did?
Peeling comes from bad prep, thin coats, or moisture. We diamond-grind every slab, fill the damage, and build the floor in layers under a clear polyaspartic topcoat, so hot tires and road salt do not lift it. Every coated floor carries a 10-year warranty.
Epoxy or polyaspartic?
Polyaspartic on about nine floors in ten: a pigmented polyaspartic base coat, Torginol flake to refusal and a clear polyaspartic topcoat. It cures fast, does not yellow in sunlight and takes hot tires. Rough or badly pitted slabs get a polyurea or epoxy base coat first, then the same polyaspartic top. An anti-slip additive is available for any floor.
Do you offer a warranty?
Yes. Every coated floor carries a 10-year warranty, in writing. Ask for the warranty document with your quote.
My concrete is cracked and stained. Can you still coat it?
Almost always. Cracks, pits and spalls get repaired and ground flush before the base coat. Old coatings and paint get ground off. If a slab has a moisture problem we tell you before we start, not after.
What is the difference between flake, solid color and polished?
Flake hides everything and gives you texture and color. Solid color is a clean, single-tone coated floor. Polished concrete is the slab itself ground and honed to a shine, with no coating to wear through. We do all three and will tell you which fits the space.
Do you do commercial and industrial floors?
Yes. Shops, dealerships, warehouses, kitchens, breweries and retail. Chemical-resistant coatings and polished concrete sized for forklifts, carts and constant foot traffic.
What does it cost?
Most full-flake garage floors run about $5 to $6 per square foot, so a typical two-car garage lands in the low thousands. Joint caulking runs about $3.75 per linear foot. Every slab is different, so we come look, walk you through what is involved and quote it free. Send photos and a rough size through the quote page, or call.
Is epoxy or polyaspartic better for a garage floor?
For a garage in Nebraska, polyaspartic. It cures in hours, stays flexible through freeze-thaw, does not yellow in sunlight and takes hot tires. Epoxy is cheaper per gallon and builds thicker per coat, so we use it as a base coat on rough slabs, always under a polyaspartic topcoat.
How long does a polyaspartic garage floor last?
Decades, when the slab is ground and repaired first. The topcoat takes the wear, and it can be recoated years down the road without redoing the floor. Every coated floor carries our 10-year warranty.
Can you coat a garage floor in the winter?
Usually. Polyaspartic cures at lower temperatures than epoxy, so the season runs longer than most people think. Tell us your week and we will tell you honestly whether the slab and the forecast work.
Do you work in Papillion, Bellevue, Gretna and Elkhorn?
Yes. We are based in Papillion and cover the whole metro: Omaha, Papillion, La Vista, Bellevue, Gretna, Elkhorn, Bennington, Millard, Ralston, Springfield and Council Bluffs. There is no travel charge.
